SPECIFICATIONS
CPU | AM4 Socket: |
1. AMD Ryzen™ 2nd Generation processors | |
2. AMD Ryzen™ with Radeon™ Vega Graphics processors | |
3. AMD Ryzen™ 1st Generation processors | |
Chipset | 1. AMD B450 |
Memory | 1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory |
2. Dual channel memory architecture | |
3. Support for DDR4 3200(O.C.)/2933/2667/2400/2133 MHz memory modules | |
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) | |
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
6. Support for Extreme Memory Profile (XMP) memory modules | |
Onboard Graphics | Integrated Graphics Processor: |
1. 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz | |
* The DVI-D port does not support D-Sub connection by adapter. | |
2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60(Note) Hz | |
* Support for HDMI 2.0 version and HDCP 2.2.(Note) | |
Maximum shared memory of 16 GB | |
(Note) Actual support may vary by CPU. | |
Audio | 1. Realtek® ALC1200-VB codec |
2. High Definition Audio | |
3. 2/4/5.1/7.1-channel | |
4. Support for S/PDIF Out | |
LAN | 1. Realtek® GbE LAN chip (10/100/1000 Mbit) |
Expansion Slots | 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. | |
(The PCIEX16 slot conforms to PCI Express 3.0 standard.) | |
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4) | |
* The PCIEX4 slot shares bandwidth with the PCIEX1_2 slot. The PCIEX4 slot operates at up to x2 mode when the PCIEX1_2 slot is populated. The PCIEX4 slot operates at up to x4 mode when the PCIEX1_2 is empty. | |
3. 2 x PCI Express x1 slots | |
(The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.) | |
Storage Interface | 1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SOCKET) |
2. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe 3.0 x2 SSD support)(M2B_SOCKET) | |
3. 6 x SATA 6Gb/s connectors | |
4. Support for RAID 0, RAID 1, and RAID 10 | |
* Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors. | |
Multi-Graphics Technology | 1. Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
USB | Chipset: |
1. 2 x USB 3.1 Gen 1 ports available through the internal USB header | |
2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) | |
Integrated in the APU: | |
1. 4 x USB 3.1 Gen 1 ports on the back panel | |
Internal I/O Connectors | 1. 1 x 24-pin ATX main power connector |
2. 1 x 8-pin ATX 12V power connector | |
3. 2 x M.2 Socket 3 connectors | |
4. 6 x SATA 6Gb/s connectors | |
5. 1 x CPU fan header | |
6. 3 x system fan headers | |
7. 1 x CPU cooler LED strip/RGB LED strip extension cable header | |
8. 1 x RGB (RGBW) LED strip header | |
9. 2 x digital LED strip headers | |
10. 2 x digital LED strip power select jumpers | |
11. 1 x front panel header | |
12. 1 x front panel audio header | |
13. 1 x S/PDIF Out header | |
14. 1 x USB 3.1 Gen 1 header | |
15. 2 x USB 2.0/1.1 headers | |
16. 1 x Trusted Platform Module (TPM) header (2×10 pin, for the GC-TPM2.0 module only) | |
17. 1 x serial port header | |
18. 1 x Clear CMOS jumper | |
Back Panel Connectors | 1. 1 x PS/2 keyboard/mouse port |
2. 1 x DVI-D port | |
3. 1 x HDMI port | |
4. 4 x USB 3.1 Gen 1 ports | |
5. 4 x USB 2.0/1.1 ports | |
6. 1 x RJ-45 port | |
7. 6 x audio jacks | |
I/O Controller | 1. iTE® I/O Controller Chip |
H/W Monitoring | 1. Voltage detection |
2. Temperature detection | |
3. Fan speed detection | |
4. Overheating warning | |
5. Fan fail warning | |
6. Fan speed control | |
* Whether the fan speed control function is supported will depend on the fan you install. | |
BIOS | 1. 1 x 128 Mbit flash |
2. Use of licensed AMI UEFI BIOS | |
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Reviews
There are no reviews yet.